Alpine CDE-130RM, CDE-130RR owner manual Specifications, 16-EN

Specifications

FM TUNER SECTION
Tuning Range	87.5-108.0 MHz
Mono Usable Sensitivity	0.7 µV
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
MW TUNER SECTION
Tuning Range	531-1,602 kHz
Sensitivity (IEC Standard)	25.1 µV/28 dB
LW TUNER SECTION
Tuning Range	153-281 kHz
Sensitivity (IEC Standard)	31.6 µV/30 dB
CD PLAYER SECTION
Sampling Range	8 times oversampling
DA Converter	1 bit DAC System
Pick-up Type	3-beam Photo Detector Pick
	Up
Light Source	Semiconductor laser
Wave length	790 nm
Laser Power	CLASS I
Frequency Response	20-20,000 Hz (±1 dB)
Signal-to-Noise Ratio	96 dB
Total Harmonic Distortion	0.01% (at 1 kHz)
Wow & Flutter	Below measurable limits
Channel Separation	85 dB
USB SECTION
USB requirements	1.1/2.0 Full Speed
Maximum Supply Compatibility	500 mA
Front AUX input
Input Impedance	10 kohms
Allowable external input	2.0 V
Connector	3.5 mm ϕ Stereo mini-pin

GENERAL
Power Requirement	12 V DC (11-16 V allowable),
	Test voltage 14.4 V, Negative
	ground
Current Consumption	Less than 2.1 A (CD mode;
	0.5 W × 4)
Maximum Power Output	50 W × 4 (at 1 kHz)
	volume control maximum
Power Output	18 W × 4
	(1 kHz, 1 %, 4 ohms)
Speaker Impedance	4-8 ohms
Pre-Output Voltage	2 V (CD mode, 1 kHz, 0dB)
Pre-Output Impedance	200 ohms
Dimensions (W × H × D)	178 × 50 × 160 mm
Weight	1.2 kg

•Due to continuous product improvement, specifications and design are subject to change without notice.

16-EN