SETUP
You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, Sound Customizing, Visual Customizing, etc., can be modified.
/ 
/ENT Rotary encoder
/RTNA.SEL/SETUP
Use steps 1 to 4 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item.
1 Press and hold A.SEL/SETUP for at least 2 seconds to activate the SETUP mode.
2 Turn the Rotary encoder to select the desired SETUP menu, and then press 
/ 
/ENT.
(e.g. Select SUBWOOFER)
DIMMER 
SUBWOOFER 
(SUBW SYS) *1 
CLOCK ADJ*2 
PLAY MODE 
SCROLLTYPE 
TEXT SCR 
POWER IC 
DEMO 
DIMMER
*1 Displayed only when SUBW is on. *2 Refer to “Setting Time” (page 7).
3 Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4 Press and hold A.SEL/SETUP for at least 2 seconds to return to normal mode.
•Press 
/RTN to return to the previous mode.
•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
Sound Customizing
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the subwoofer output level.
1In the normal mode, press Rotary encoder repeatedly to select the SUBW mode.
SUBW 
BASS 
TREBLE 
BAL 
FADER 
DEFEAT 
VOLUME 
SUBW
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
SUBW SYS 1: Subwoofer level changes according to the main volume setting.
SUBW SYS 2: Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible.
Visual Customizing
Dimmer Control
DIM AUTO (Initial setting) / DIM MANUAL
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit’s backlighting is too bright at night.
Scroll Type Setting
SCR TYPE1 / SCR TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
SCR TYPE1: The characters scroll from right to left, a single character at a time.
SCR TYPE2: Words are built up from left to right, a single character at a time. When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown.
