7-EN

Setting the Treble Control

You can change the Treble Frequency emphasis
to create y our own tonal preference.
1Press the TREBLE C. to turn on the Treb le
setting mode.
2-1 Setting Treble frequency:
Press g DN or f UP b utton to select the
desired Treble center frequency.
10kHz 12.5kHz 15kHz 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
2-2Setting Treble Le vel:
Press the 55
55
5 or 66
66
6 button to select the desired
Treble Level (-7~+7).
You can emphasize the treble frequency.
NOTES
If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
The settings of the Bass and Treble will be individuall y
memorized for each source (FM, AM and CD) until the
setting is changed. Depending on the connected
devices, some functions and display indications do not
work.

Changing Audio Level Display

Pattern

1Press DISP button to switch the display pattern.
DISP1:
Lights the Volume indicator and Audio Level
indicator.
DISP2:
Lights the mode and value bars to show the
settings in the Bass engine display.
NOTE
The last mode set will remain in effect. The mode and
value bars light and show the Bass engine setting.
DISP1 DISP2 DISP OFF
Audio Level indicator
Volume indicator
Example setting:
Bass center frequency:
100 Hz
Bass band width: WIDE1
Bass level: -6
DISP OFF:
Turns off the light in Bass engine display.
If you set DISP OFF, the Volume indicator, Audio
Level indicator, and Bass engine displays are
not lit at all times.
To light them, press the DISP button to exit DISP
OFF.
NOTE
If no buttons are pressed within 5 seconds, the display
will return to normal mode automatically.

Setting the AUX Mode

You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1Press and hold the SETUP button for at least 3
seconds.
2Press the g DN or f UP button to select
the AUX mode.
3Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4Press the SETUP button to return to normal
mode.
5To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
TUNER CD AUX
NOTE
When AUX ON is selected, a CD Changer cannot be used.