Alpine ERA-G311 Customizing the Equalizer Settings, 2.0K +6, Remote Control English Operation

1

2

3

Remote Control English

Operation

The remote control operations (RUE-4185/ RUE-4160/RUE-4162) described in the following sections are applicable to full Ai-NET compatible units only (TDA-7558, etc.).

Notes:

•The following display examples appear in the Alpine Ai-compatible head unit displays.

•These displays will differ depending upon the Alpine head unit connected.

Customizing the Equalizer

Settings

Select the equalizer characteristic to be adjusted. Refer to page 18 "Selecting the Factory Preset Equalizer Settings".

Press the ENT button to enter the frequency 50 0 adjustment mode. The first frequency band will

be displayed for 5 seconds.

ENT

RUE-4160

2.0K	0	While in the frequency adjustment mode, press
		the c	or f	button to display the frequency to

ENT

be adjusted.

Changes to the frequency band selected must be made within 5 seconds, otherwise the unit will return to normal mode.

RUE-4160

4

2.0K +6

ENT

RUE-4160

While the frequency is still displayed, press the

8or 9 button to adjust for the desired level. If you want to adjust more, repeat the steps above.

Note: In the dual mode, press the BAND/PROG button to switch Front/Rear.

24