59-EN
8Press 1 ( ) or 5 ( ), select “LEVEL [Level]”,
then press 2 (ENT).
9Press 2 (ENT), press 1 ( ) or 5 ( ), adjust the
output level, then press 6 (RTN).
Each speaker can be adjusted by ±10 dB
(±1 dB step).
10
To adjust another speaker, repeat steps 6 to
9.
11
When the settings are completed, press 1( )
or 5 ( ), select “End” and press 2 (ENT).
The test tone output is cleared.
If “End” is not selected, the test tone is not
cleared, and the SETUP cannot be exited.
12
Once the settings are completed, press and
hold F • SETUP for at least 3 seconds.
•Press 6 (RTN) or RETURN on the remote control in
the setting mode to return to the previous item.
Supplement
See page 88 for supplementary information.
LEVEL

LEVEL 0 dB