Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Warning

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your TDM-7582E. This will reduce any chance of damage to the unit in case of a short- circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the TDM-7582E to the fuse box, make sure the fuse for the intended circuit of the TDM-7582E has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The TDM-7582E uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

Caution

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

14-EN

Page 15 Page 17
Page 16
Image 16
Alpine TDM-7582E owner manual Installation and Connections, Precautions
Page 15 Page 17

TDM-7582E specifications

The Alpine TDM-7582E is an advanced multimedia receiver specifically designed to enhance the in-car entertainment experience. This versatile unit stands out due to its exceptional blend of quality audio performance, cutting-edge technology and user-centric features, making it an excellent choice for car enthusiasts and casual listeners alike.

At the heart of the TDM-7582E is its robust audio processing capabilities. The unit supports high-resolution audio formats and offers a built-in digital signal processor (DSP), allowing users to customize their audio experience. With an extensive equalizer and preset sound modes, it caters to various musical tastes, ensuring every journey is accompanied by exceptional sound clarity and depth.

One of the most striking features of the TDM-7582E is its large, responsive touchscreen display. The 7-inch display makes navigation through menus and features intuitive, while also offering vibrant colors and sharp resolution. Additionally, it includes a user-friendly interface that ensures drivers can control their music and settings without distractions.

Connectivity is another highlight of the Alpine TDM-7582E. It comes with Bluetooth capabilities, enabling users to stream music wirelessly from their smartphones and make hands-free calls with ease. The built-in USB port facilitates quick access to digital music libraries, while the auxiliary input allows for additional devices to be connected, enhancing versatility.

The TDM-7582E also includes compatibility with various smartphone integration platforms, such as Apple CarPlay and Android Auto. This feature allows users to seamlessly connect their devices, enabling access to apps, navigation tools, and more directly from the display. The incorporation of these technologies not only enhances convenience but also promotes safety by minimizing distractions while driving.

In terms of installation, the Alpine TDM-7582E is designed to fit a range of vehicles, making it a flexible option for many different setups. It features an array of outputs, including RCA pre-outs for additional amplifiers or subwoofers, which provides the flexibility to create a custom audio system tailored to individual preferences.

Overall, the Alpine TDM-7582E is a stellar choice for anyone looking to upgrade their in-car audio system. With its combination of high-quality sound, modern connectivity options, and user-friendly interface, it elevates the driving experience, making every trip enjoyable and entertaining. Whether you are a music aficionado or simply looking for a reliable multimedia receiver, the TDM-7582E delivers on all fronts.
Top Page Image Contents