Altec Lansing IM4 PORTABLE AUDIO SYSTEM, Box Contents, PLACING THE IM4 SYSTEM, Ac Power

IM4 PORTABLE AUDIO SYSTEM

Thank you for purchasing this Altec Lansing product. For generations,

Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of desktop environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!

BOX CONTENTS

•iM4 portable audio system

•Universal power supply with changeable plug set

•Protective carry bag

•User’s guide and quick connect instructions

PLACING THE IM4 SYSTEM

Position the iM4 system on a level surface, preferably close to you (within three feet). The iM4 system can be placed close to video displays such as TVs and computer monitors without distorting the image.

MAKING CONNECTIONS

Warning: Do not insert the speaker system’s universal power supply into a wall outlet until all connections are made. Also, turn off your MP3 Player or other portable audio device before connecting it to the iM4 system.

To ensure first-time operation as expected, please carefully follow the connection sequences described below in the order indicated.

MP3 Players or other portable audio devices can be connected to the iM4 system by plugging the iM4 retractable signal cable into your device’s “line-out,” “audio-out,” or headphone jack. This is the only input connection that needs to be made. After this connection is made, insert the barrel connector from the universal power supply into the connector

marked on the rear of the iM4 system. After this connection is made, insert the universal power supply into a wall outlet. You can now use your speakers.

Please note, the iM4 system can also be powered with four AA batteries (not included). Make sure the batteries are installed as illustrated in the battery compartments found on the bottom of the iM4 system.

POWER

AC POWER

After your MP3 Player is connected to the iM4 system, plug the universal power supply into a wall outlet. The speaker system is now ready to operate.

DC (BATTERY) POWER

Install four AA batteries (not included) into the battery compartments on the bottom of the iM4 system (two to each compartment). Make sure the batteries are installed as illustrated in the battery compartments. After your MP3 Player is connected to the iM4 system, the speaker system is ready to operate.

START PLAYING

1.Turn on your MP3 Player.

2.Turn on the Altec Lansing iM4 system by sliding the power switch located on the left side of the unit to the right. An LED will light next to the button when the power is on.

Note: To avoid hearing a popping sound when you turn on your iM4 system, always turn on your audio source first.

VOLUME

The slider on the right side of the iM4 system is the master volume control for the speaker system. Move the slider to the right to increase the volume or to the left to decrease the volume.

AUXILIARY INPUT

This auxiliary or secondary input is located on the back of the iM4. It allows you to connect a secondary audio source that has a stereo 3.5mm plug (i.e., headphone style plug), including another portable CD or MP3 players.

SYSTEM SPECIFICATIONS

Altec Lansing’s superior sound comes from our patented technology, which utilizes custom-built, high-fidelity drivers, state-of-the-art equalization circuitry, and a harmonious mix of the following specifications:

Total Continuous Power:		4	Watts RMS	Signal to Noise Ratio
				@ 1 kHz input:	> 75 dB
	• Drivers:	2	Watts/channel @ 8 ohms
		@ 10% THD+N @ 20 Hz – 20 kHz		Drivers:	Four 25 mm full-range
		2	Channels Loaded		neodymium micro drivers
Frequency Response:		60 Hz – 20 kHz

2