DISTRIBUTION AMPLIFIERS
INSTALLING YOUR DA1506RT | 6 |
Step 1. Plug the power adapter into an AC receptacle.
Step 2. Connect the power to the unit. The power indicator LEDs on the front and back panels will turn on and red. This indicates that the unit is operational.
Step 3. Connect a
Step 4. Connect a
Step 5. Connect the output connectors of the amplifier to your display devices: monitors, projectors, LCDs, etc.
Step 6. If the image is less than perfect, check all of the connections. Poor quality cables may often degrade the performance of the product. Make sure that the cables used are coaxial cables and that all pins are in good condition.
OPERATION | 7 |
There are no adjustments necessary to operate the unit. The DA1506RT will operate successfully as long as cables are attached properly and other technical specifications are followed.
TROUBLESHOOTING GUIDE | 8 |
We have carefully tested and found no problems in the supplied DA1506RT; however, we would like to offer suggestions for the following:
∙Please make sure that the input amplitude of analog signal is less than 1.5
∙Please use the
∙Please make sure that proper quality of cables is used. We recommend
∙If a problem arises after continuous usage at higher voltage, higher temperature, higher humidity, or at other extreme environmental conditions, please make the necessary adjustments for the DA1506RT to function safely and properly.
ALTINEX POLICIES | 9 |
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
9.2CONTACT INFORMATION ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714
TOLL FREE:
WEB: www.altinex.com
E-MAIL: solutions@altinex.com
7 |