DISTRIBUTION AMPLIFIERS
PRECAUTIONS / SAFETY WARNINGS | 1 |
Please read this manual carefully before using your DA1506RT Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1506RT and to prevent fire and shock hazards. Please read them carefully and heed all warnings.
1.1 GENERAL
∙Qualified ALTINEX service personnel or its authorized representatives must perform all service.
1.2. RACK-MOUNTING SAFETY GUIDELINES
∙The maximum operating ambient temperature for this unit is 35°C.
∙Distribute units evenly inside the rack. Hazardous conditions may be created by an uneven weight distribution.
∙Connect the unit to a properly rated circuit.
∙Reliable grounding should be maintained.
1.3 HANDLING
∙For best results, place the DA1506RT on a flat, level surface in a dry area away from dust and moisture.
∙To prevent fire or shock, do not expose this unit to water or moisture. Do not place the DA1506RT in direct sunlight, near heaters or
∙Handle the DA1506RT carefully. Dropping or jarring can damage internal components.
∙Do not place heavy objects on top of the DA1506RT. If the DA1506RT is to be mounted to a table or wall, use only
∙To turn off the main power, be sure to remove the power cord. The power outlet should be installed as near to the equipment as possible, and should be easily accessible.
∙Do not pull any cables that are attached to the DA1506RT.
∙If the DA1506RT is not used for an extended period, disconnect the power cord.
1.4 CLEANING
∙Unplug the DA1506RT before cleaning.
∙Clean only with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit. Do not open the unit to clean.
1.4 FCC NOTICE
∙This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
∙This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
∙Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
2 |
