Altinex Policies, No Sound | Altinex DS801-111 manual

SPECIAL APPLICATION

Cause 4: Video equalization required.

Solution: Adjust the VIDEO EQUALIZATION

on the DS801-111.

Some monitors are very sensitive to signal quality and this may prevent the monitor from displaying an image until the equalization is adjusted. See the operation section for adjustment details.

Cause 5: The display has a problem.

Solution: Make sure the display is powered and is turned on. If there is still no display, please call ALTINEX at

(714)990-2300.

8.2NO SOUND

Cause 1: The source has a problem.

Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no sound, see Cause 2.

Cause 2: The volume is too low.

Solution: Increase the gain at the source. If there is still no sound present, see Cause 3.

Cause 3: Cable connections are incorrect.

Solution: Make sure that cables are properly connected. Also, make sure that the continuity and wiring are good. If there is still no sound, see Cause 4.

Cause 4: The receiving device has a problem.

Solution: Make sure the receiving device is powered and is turned on. If there is still no sound, please call ALTINEX at (714) 990-2300.