SWITCHERS
PRECAUTIONS / SAFETY WARNINGS | 1 |
Please read this manual carefully before using your MX4206RM Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2406RM and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
1.1 GENERAL
•Unauthorized personnel shall not open the unit since there are
•Qualified ALTINEX service personnel, or their authorized representatives must perform all service.
1.2SAFETY GUIDELINES FOR THE RACK- MOUNTING OF THE MX2416RM
•Maximum operating ambient temperature is 35 (degrees C).
•Never restrict the airflow through the device’s fan or vents.
•When installing equipment into a rack, distribute the units evenly. Otherwise, hazardous conditions may be created by an uneven weight distribution.
•Connect the unit to a properly rated supply circuit.
•Reliable Earthing (Grounding) of
1.3 INSTALLATION
•For best results, place the MX2406RM Switcher on a flat, level surface in a dry area away from dust and moisture.
•To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the MX2406RM Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke or steam can harm internal components.
•Handle the MX2406RM Switcher carefully. Dropping or jarring can damage internal components.
•Do not place heavy objects on top of the MX2406RM. If the MX2406RM is to a table or wall, use only an ALTINEX made mounting
accessories like rack mount shelf DA1298RM or rack mount ears DA1299RM and cables for optimum setup.
•To turn off the main power, be sure to remove the cord from the power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.
•Do not pull the power cord or any cable that is attached to the MX2406RM Switcher.
•If the MX2406RM Switcher is not to be used for an extended period of time, disconnect the power cord from the power outlet.
1.4 CLEANING
•Unplug the MX2406RM power cord before cleaning. Clean surfaces with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.
1.5 FCC / CE NOTICE
•This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesired operation.
•This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
•Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
2
