Altinex VA6831FC manual Application Diagram Installing Your Interface, Mounting Capability

INTERFACES

4.8 MOUNTING CAPABILITY

The VA6831FC can be easily mounted into an equipment rack. Four mounting holes are provided on each side of the unit. To mount a single unit, use Altinex 19”-1U Rack Mount Ears (part # DA1294FC). To mount two units in tandem, use an Altinex 19”-1U Rack Mount Shelf (part # DA1293FC). For under the table mounts, optional brackets, such as TM1271, TM1272, TM1273, or TM1274 can be used.

APPLICATION DIAGRAM 5

INSTALLING YOUR INTERFACE 6

Step 1. Please attach the Interface on the rack using the provided rack mount hardware or using the optional TM Series Altinex mounting brackets, through two screens on each side of the VA6831FC.

Step 2. The VA6831FC may be used with either 110V or 220V and offers a universal connector for ease of use throughout the world. Before plugging in the power cord to the unit, please verify that the voltage rating of 110V/220V on the

FUSE CLIP located on the rear of the VA6831FC is the same as the voltage rating on the power outlet. To change the setting, unplug the VA6831FC, squeeze the clips on either side of the fuse box, and pull out the fuse holder. Then turn the Fuse Dip 180 degrees, resetting it with the proper voltage shown through the window. Please reinsert the fuse box. The side clips of the fuse box should lock securely into place.

Step 3. Connect the power cord, pushing it in gently but firmly. The power indicator

7