INSTALLING YOUR VM2142AU | 6 |
Step 1. Slide the VM2142AU and the VM2141AU into available slots in the
Step 2. Connect audio cables from the audio source to the input connector of the
VM2141AU. Connect the output connectors of the VM2142AU to the audio equipment through an audio cable.
OPERATION | 7 |
The VM2142AU will operate successfully as long as the card is installed properly and other technical specifications are followed.
TROUBLESHOOTING GUIDE | 8 |
We have carefully tested and have found no problems in the supplied VM2142AU; however, we would like to offer suggestions for the following:
∙Make sure that power is connected to the enclosure and also check to see if the VM2142AU is pushed in all the way.
∙If there is no sound, check the source and make sure that it is working at an appropriate volume level and all source connections are correct.
∙Make sure that cables are connected properly. Also, make sure that the continuity and wiring are good.
∙Make sure that the destination amplifier is powered. Set the volume of the destination amplifier to a reasonable level.
∙Make sure that the source signal level is high enough so that the destination amplifier does not have to provide excessive amplification and thereby distort the signal.
∙If there is problem with the VM2142AU please call ALTINEX at (714)
5
