Chapter 3: Configuration
3.2 Configure as a Wired Client
If there is no 802.11b/g wireless network, AIREC01F can also connect to the wired network through an Ethernet cable.
For this case, prior to power on the device, you have to plug in the Eth- ernet cable into the LAN (RJ45) connector on the back of the unit. After you power on the device, it will automatically go into the wired client mode when it detects a link status through the Ethernet connection.
First time using device with an Ethernet cable plugged in:
| Instructions | Screenshot | Go to next | Notes |
|
|
| screen |
|
1. | POWER ON |
|
|
|
|
|
|
|
|
2. |
|
|
| Device is running |
|
|
|
| as a Wireless |
|
|
|
| Client. |
|
|
|
|
|
3. |
|
|
| The device is in |
|
|
|
| wired client mode |
|
|
|
| now. It already |
|
|
|
| connected to your |
|
|
|
| network. |
|
|
|
|
|
12
