Drying Clothes

If These Controls

are Different from

Yours

These controls are intended to show the
variety offeatures that are available in
the product line. If your dryer does not
have all theoptions thatare shown, it is
not a mistake. The information
provided applies to several of the
models in the product line.

Lint

Filter

IMPORTANT: Lint filter must be in
place in door opening when using dryer
or loading and unloading dryer. If filter
is not in place, clothing could fall into
front air duct.
1. Sort clothes for drying
Properly dried clothes willneed aminimum of care when removed from
the dryer. Clothes properly sorted forwashing should be properly sorted
for drying also. Follow the examples below.
SORT EXAMPLES
Dark and Light Separate light clothes from dark clothes.
Colors
Lint Shedding Towels, flannels, chenille, cottons, rugs
Fabrics
Lint Receiving Corduroys, knits (including socks),
Fabrics permanent press, and synthetics
Heavy and Light Lightweight fabrics dry faster than heavyweight
weight Fabrics fabrics. If mixed loads are driedtogether (such
as sheets and towels), remove the lighter
weight fabrics when they are dry to prevent
over drying and wrinkling.
2. Clean the lint filter before each use
Aclean lint filter ensures efficient drying and clothes will remain lint-
free when unloading dryer. A layer oflint onthe screen will reduce air
flow through the dryer and lengthen drying time. Lintscreen may be
washed ifneeded.
•Lint filter islocated atfront ofthe dryerin the lower part of door opening.
• Replace lint filter indoor recess and push in firmly. Words on filter
should face frontof dryer.
Add clothes loosely into dryer drum. Add fabric softener sheet, if
desired. Close loading door, Dryer will not operate with the door open.
FLUFF
NO HEAT

FABRIC SELECTOR

DELICATE PERM. PRESS
LOW MEDIUM
REGULAR
HIGH
3. Select FABRIC SELECTOR setting
Set FABRIC SELECTOR knob tomost appropriate temperature fortype
offabric in load. Follow garment manufacturer's care label for
recommended temperature settings. See chart below.
FABRIC SELECTOR
Regular/Nigh
Approximately 160°F
Perm. Press Regular/
Med. High
(some models)
Approximately 155°F
Perm. Press/Medium
Approximately 150"F
Delicate/Low
Approximately 129"F
Fluff/No Heat
No heat
CYCLE
Automatic Regular
Use for sturdy items like playor work clothes.
Automatic Regular/Perm
Use for sturdy items like playor work clothes,
permanent press items, and synthetics.
Automatic Permanent Press/Knits
Use for permanent press and synthetic items.
Automatic Delicate
Use for delicate items.
Any Cycle
Time Dry cycle can be used with all Fabric Selector settings.
4