Features, Hints, and Care
Follow the Colors
Your dryer control panel is color coordinated for your convenience. When you set your controls, notice which colors are the same. They will help guide you through setting the controls.
Drying Times
It is impossible to give exact drying times. Conditions from home to home vary and directly affect drying times. The length of time it takes to dry loads will depend on several variables.
•Load size
•Type of fabric, washer, and spin speed will determine moisture in the fabric.
•Heat and moisture in the room. Damp air coming into the dryer will increase drying time.
•Installation (length of exhaust duct, etc.).
•Electric voltage or gas pressure.
If you have an automatic cycle, you need not worry about time. The automatic cycle will determine the time needed. Set the timer for the type of fabric in the load. See the operating instructions provided with your dryer. Do not set the timer for a “higher” setting than necessary. If you have a permanent press, knit cycle, use it for loads of permanent press, knits and for clothes made from or containing synthetic fibers. This cycle has a longer COOL DOWN period at the end of the cycle to reduce wrinkling.
Optional Drying Rack |
| |
(some models) |
| |
Drying Rack, Part No. 504105, is useful for |
| |
drying items that require |
| |
such as tennis shoes, sweaters, stuffed |
| |
toys or other delicate items. |
| |
General Dryer Care | Drying Rack | |
Cleaning | ||
|
•Ordinarily, dryer cylinder will need no care.
•Wipe dryer cabinet as needed. If detergent, bleach or other washing products have been spilled on the dryer, wipe immediately. Some products will cause permanent damage if spilled on the cabinet.
•Do not allow sharp or rough objects to lean against the dryer. The finish could be damaged.
•Use only a damp or sudsy cloth for cleaning the control panel. Some spray prewash products may harm the finish on the control panel.
Lint Filter
Clean lint filter after drying each load. A clean lint filter ensures efficient drying and clothes will remain
Lubrication
All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary.
Exhaust System
•The exhaust duct should be inspected after one year of use and cleaned if necessary. Inspect and clean exhaust duct every one to two years as required thereafter.
•The weather hood should be checked frequently to make sure the dampers move freely, dampers are not pushed in and that nothing has been set against them.
•Keep dryer area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
•Do not obstruct the flow of combustion (gas dryers) and ventilation air.
How to Remove Ball Point Pen Ink Marks from the Dryer Drum
If the ink stain is fresh, place dry rags in the dryer. Using the hottest heat setting, run the dryer for one hour to absorb the ink.
If the stain is not fresh, apply household spray or cream cleaner to a soft cloth, and rub the stain. Then, place wet rags in the dryer. Using the hottest heat setting, run the dryer for one hour to remove any cleaner residue.
6
