Trouble Shooting (cont'd)
TOPIC | POSSIBLE CAUSE | SOLUTION |
Drying
Long drying times | Improper exhaust system | Check Installation Instructions for length of proper exhaust |
|
| system. Only use 4” diameter rigid or |
|
| Restricted airflow will cause dryer to stop heating. Check |
|
| weather hood and exhaust system for restrictions. |
|
|
|
| Overloading | Dry one wash load at a time. |
|
|
|
| Sorting | Separate heavy items from lightweight items. |
|
|
|
| Full lint filter | Clean lint filter before each use. |
|
|
|
| Clothes too wet from washer | Check that the washer had enough spin speed to extract |
|
| water. Clothes may need to be rearranged in the washer |
|
| and put through an additional spin cycle to extract enough |
|
| water before drying. |
|
|
|
Lint | Full lint filter | Clean lint filter before each use. |
|
|
|
| Improper sorting | Separate lint producers (cotton towels) from lint attracters |
|
| (synthetic fabrics). |
|
|
|
| Paper, tissues, or other items left in pockets | Remove items from pockets before washing or drying. |
|
|
|
| Overloading | Overloading reduces airflow so lint is not collected in filter. |
|
| Dry one wash load at a time. |
|
|
|
Static | Overdrying | Adjust controls for shorter drying time. Use a fabric |
|
| softener. |
|
|
|
| No fabric softener was used | Use a fabric softener. |
|
|
|
| Synthetic fabrics can cause static | Use a fabric softener. |
|
|
|
11
