Drying Clothes
If These Controls |
are Different from |
Yours |
These controls are intended to show the variety of features that are available in the product line. If your dryer does not have all the options that are shown, it is not a mistake. The information provided applies to several of the models in the product line.
Lint
Filter
IMPORTANT: Lint filter must be in place in door opening when using dryer or loading and unloading dryer. If filter is not in place, clothing could fall into front air duct.
1. Sort clothes for drying
Properly dried clothes will need a minimum of care when removed from the dryer. Clothes properly sorted for washing should be properly sorted for drying also. Follow the examples below.
SORT | EXAMPLES |
|
|
Dark and Light | Separate light clothes from dark clothes. |
Colors |
|
|
|
Lint Shedding | Towels, flannels, chenille, cottons, rugs |
Fabrics |
|
Lint Receiving | Corduroys, knits (including socks), |
Fabrics | permanent press, and synthetics |
|
|
Heavy and Light | Lightweight fabrics dry faster than heavyweight |
weight Fabrics | fabrics. If mixed loads are dried together (such |
| as sheets and towels), remove the lighter |
| weight fabrics when they are dry to prevent |
| over drying and wrinkling. |
|
|
2. Clean the lint filter before each use
A clean lint filter ensures efficient drying and clothes will remain lint- free when unloading dryer. A layer of lint on the screen will reduce air flow through the dryer and lengthen drying time. Lint screen may be washed if needed.
•Lint filter is located at front of the dryer in the lower part of door opening.
•Replace lint filter in door recess and push in firmly. Words on filter should face front of dryer.
Add clothes loosely into dryer drum. Add fabric softener sheet, if desired. Close loading door. Dryer will not operate with the door open.
3. Select FABRIC SELECTOR setting
Set FABRIC SELECTOR knob to most appropriate temperature for type of fabric in load. Follow garment manufacturer’s care label for recommended temperature settings. See chart below.
FABRIC SELECTOR | CYCLE |
Perm. Press Regular/ | Automatic Regular/Perm Press |
Med. High | Use for sturdy items like play or work clothes, |
Approximately 155ºF | permanent press, casual items, and |
| synthetics. |
Delicate/Low | Automatic Delicate |
Approximately 129ºF | Use for delicate items. |
|
|
Fluff/No Heat | Any Cycle |
No heat |
|
Time Dry cycle can be used with all Fabric Selector settings.
4
