THEF_CTREALCONNECFONS
SEE THE ELECTRICAL REQUIREMENTS SECTION
CAUTION: Verify power to dishwasher is off at source.
O Remove terminal box covet:
Ix order to secure the power supply cable, a UL listed strain relief nmst be used to secure the power supply to the back of tet'mina[ box,
QStrip approximatdy 3/8" (.09 em) of"insulation fl'om incoming power supply wires. Connect these wires to wires from dishwasher wire ]harness located in the terminal box. Connect
wires using the appropriate size wire nuts, twisting and tightening securely over the wire connections. Connect white to white and black to black.
n ....... 27- ZZ
OTerminal I_o_
Black to Black
to White
Attach external grom)d wire frmn be]hindwasher of greet) grmmding screw. If an external groundwh'e is used. insert the wire through the cable clamp and attach behind washer of the green gro,nding screw. Attach the other end of external gro,nd wire to a s,itabie
external ground. If a question arises, refer to yore' local electrical codes,
Seem'e the strain relief and replace the termina! box covet:
StraiJJ Relief
IIOORUP
CHECKLOCALPLUMBINGCODESFOR APPROVEDPLUMBING
......... =PROCEDURESANDACCESSORIES.ALLPLUMBINGSHOULDBEDONE
IN ACCORDANCE WITH NATIONAL AND LOCAL CODES.
Connect water supply line to water valve, Minimum 3/8" 0.D. copper tubing or equivalent.
S}I[UTOFFVALVE:Instal[ a hand shutoff valve it) the water supply line ix an accessible location, such as m)der the sink The shutoff is optional, but recmnmended and may be req_fired by local codes. Connections are pt'eferab[e located toward the left side of dishwasher: Care should be taken to route plumbing away frmn motor and blower (if equipped), DONOT make these connections until the dishwasher is it) position,
Care s]houldbe taken to protect dishwas]her and water lines leading to dishwasher frmn freezing, Damagefrom freezing is not coveredby the warranty.
C]Mckdrain hose cmmection for leaL
