Using the Controls – Electronic Control Models
STEP 5
Fabric Selection
Select the appropriate fabric cycle for the type of load by turning the cycle selector dial until the indicator light by the desired fabric selection is illuminated.
WASH/SPIN | FABRIC SELECTION | |||
| SPEED |
| ||
| Quick Wash | For lightly soiled or wrinkled | ||
| Gentle/Fast |
| garments needed quickly. | |
Ultra Hand Wash | Provides intermittent agitation and | |||
Ex. Gentle/Slow | soak. For wool, silk, and other | |||
|
|
|
| |
| Hand wash | For sheer fabrics, bras and lingerie | ||
| Gentle/Slow | needing slower spin speed because | ||
|
|
|
| of clothing construction. |
| No Iron |
| For “wash and wear” and synthetic | |
Medium/Slow | fabrics and lightly to normally soiled | |||
|
|
|
| garments needing a slower spin |
|
|
|
| speed to reduce wrinkling. |
| Regular | For most sturdy fabrics including | ||
| Medium/Fast |
| cottons, linens and normally soiled | |
|
|
|
| garments needing maximum water |
|
|
|
| extraction. |
Whites & Towels | For sturdy fabrics and heavily soiled | |||
| Normal/Fast | whites needing maximum water | ||
|
|
|
| extraction. |
|
|
|
|
|
Soak Only
Provides approximately 33 minutes of alternating periods of soaking with brief agitation at slow speed. At the end of the cycle, the Cycle Selector dial must be manually set to a wash cycle or spin cycle to drain the washer. Avoid extended soaking.
Spin Only
Provides a spin to remove more water from the load.
Rinse and Spin
Use for loads that need rinsing only or to add rinse- added fabric softener to a load.
Power Off
To cancel the cycle and turn off the washer, turn the Cycle Selector dial to Power Off and push the dial in.
STEP 6
Start the Washer
To start the washer, press the cycle selector dial.
Changing a Cycle
If an incorrect cycle has been accidentally selected:
1.Press the cycle selector dial.
2.Turn the cycle selector dial to the desired cycle.
3.Set the desired options for the cycle.
4.Press the cycle selector dial. The Wash indicator lights stop flashing and the new cycle starts.
Canceling a Cycle
To cancel a cycle:
1.Press the cycle selector dial.
2.Turn the cycle selector dial to Power Off and push the dial in.
To drain the washer:
1.Select the Rinse & Spin or Spin Only cycle.
2.Press the cycle selector dial. The Spin light illuminates and the washer starts the rinse or spin.
11
