®

Electric Dryer

PRODUCT MODEL NUMBERS

NED7200T

Electrical: A four-wire or three-wire, single phase, 120/240-volt, 60 Hz, AC-only, electrical supply (or 120/208-volt electrical supply, if specified on the serial/rating plate) is required on a separate 30-amp circuit, fused on both sides of the line.

Exhaust venting: Exhaust your dryer to the outside. 4" (10.2 cm) diameter vent is required. Heavy metal exhaust vent must be used. Do not use plastic or metal foil vent. Exhaust outlet hood must be at least 12" (30.5 cm) from the ground or any object that may be in the path of the exhaust.

PRODUCT DIMENSIONS

A. Overall height: 38" (96.5 cm)

B. Width: 27" (68.6 cm)

C. Depth with door open 90°: 46-7/16" (123.0 cm)

D. Depth: 28" (71.0 cm)

E. Bottom vent location from back to center of hole: 7-1/2" (19 cm)

Side vent hole from back to center of hole: 8-1/2" (21.6 cm)

NOTE: The height of the dryer from top to floor is 38" (96.5 cm) with the leveling leg screwed all the way in. The customer can unscrew the leg out an additional 7/8" (2.2 cm) for a total overall height of 38-7/8" (98.7 cm).

RECESSED AREA AND CLOSET INSTALLATION

Minimum clearances between dryer cabinet and adjacent walls or other surfaces are: 2" (5.1 cm) front, 0" (0 cm) top, 0" (0 cm) either side and 2-3/8" (6.0 cm) rear.

Closet front must have two unobstructed air openings combined total area 72"2 (464.5 cm2), located 3" (7.6 cm) minimum from trop and bottom.

Louvered door with equivalent air opening is acceptable.

An appliance installed in a closet shall have no other fuel-burning appliance installed in the same closet.

EXHAUST VENTING

 

 

ELECTRIC AND GAS DRYER

 

 

 

 

 

 

 

 

Weather Hood Type

 

 

 

 

 

 

 

Recommended

Use only for short run installation

 

 

 

 

 

 

4" (10.2 cm)

 

 

2-1/2" (6.4 cm)

 

 

 

 

 

No. of 90°

Rigid

Metallic Flexible*

Rigid

Metallic Flexible*

elbows

0

80' (24.4 m)

41' (12.4 m)

74' (22.6 m)

33' (10.1 m)

1

68' (20.7 m)

37 ' (11.2 m)

62' (18.9 m)

29' (8.8 m)

2

57' (17.4 m)

33' (10.1 m)

51' (15.5 m)

25' (7.6 m)

3

47' (14.3m)

29' (9.0 m)

41' (12.5 m)

21' (6.5 m)

 

 

 

 

 

* Do not use non metallic flexible duct.

Select the route that will provide the straightest and most direct path outdoors. Plan the installation to use the fewest number of elbows and turns. Avoid making 90° turns.

Do not use vent runs longer than specified in vent length chart.

Determine the number of elbows you will need.

NOTE: Side and bottom exhaust installations have a 90° turn inside the dryer. To determine maximum exhaust length, add one 90° turn to the chart.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. W10161760

Instructions packed with product. Specifications subject to change without notice.

09-05-08

Page 1
Image 1
Amana NED7200T dimensions Electric Dryer, Product Model Numbers, Product Dimensions, Recessed Area and Closet Installation

NED7200T specifications

The Amana NED7200T is a reliable and efficient electric dryer that has garnered attention for its user-friendly features and robust performance. Designed with the modern consumer in mind, this dryer combines convenience and efficiency, making laundry day less of a chore.

One of the standout features of the Amana NED7200T is its large capacity drum. With a spacious interior that can accommodate up to 7.0 cubic feet of laundry, this dryer can easily handle bulky items like blankets and comforters, as well as regular loads. This generous capacity not only saves time but also reduces the number of cycles needed to dry a full laundry load, making it an ideal choice for families.

The dryer is equipped with multiple drying cycles that offer versatility for different fabric types and load sizes. It includes options like Random Dry, Timed Dry, and Air Dry, allowing users to select the optimal setting for their specific laundry needs. The Auto Dry technology automatically senses when clothes are dry and stops the cycle, preventing over-drying and saving energy.

In terms of energy efficiency, the Amana NED7200T is designed to minimize energy consumption. By using advanced heating elements and insulation, this dryer achieves effective drying performance while keeping energy use in check. This not only helps the environment but can also lead to lower utility bills over time.

The dryer features a simple and intuitive control panel that makes it easy to select the desired settings. The straightforward layout ensures that users can operate the machine without confusion, allowing for a hassle-free laundry experience. Additionally, the drum is constructed from durable materials that resist wear and tear, ensuring long-lasting use.

To enhance user convenience, the Amana NED7200T includes features such as a chime that alerts users when a cycle is complete, preventing the annoyance of forgotten laundry. The lint filter is easy to access and clean, further simplifying maintenance and promoting efficient airflow for optimal drying.

Overall, the Amana NED7200T combines capacity, efficiency, and ease of use, making it an attractive option for anyone looking for a dependable electric dryer. Its thoughtful design and range of features cater to the needs of busy households, while its reliable performance ensures that every load comes out perfectly dry and ready to wear. Whether you're tackling daily laundry or larger items, this dryer is equipped to handle it all.