Programming

Reviewing Preprogrammed Pads

1.Open oven door.

•Display shows “b” or “d” and “READY”.

•Fan and light operate.

•If door is closed or RESET pad is pressed before finishing programming sequence, oven exits programming mode.

2.Press and hold TIME ENTRY pad for approximately 15 seconds.

•After 15 seconds, signal sounds. Display shows “Pb” or “Pd” indicating “b” or “d” menu.

3.Press MENU pad to select preprogrammed menu if necessary.

4.Press desired number pad.

•Display shows heating time, pad number, and power level if less than 100 percent power.

5.Press TIME ENTRY pad to review heating stages for pad.

•“(b or d)P” and stage show briefly, then heating time, pad number and power level if less than 100 percent power show in display.

6.Press START pad after reviewing preprogrammed pad.

•Display shows “Pb” or “Pd” indicating “b” or “d” menu.

•Repeat steps 3-6 to review another preprogrammed pad.

7.Press RESET pad or close oven door to exit programming mode.

Manual Time Entry

1.Open oven door, place food in oven, and close door.

•Display shows “b” or “d” and “READY”.

•Fan and light operate.

•If pad is not pressed in 30 seconds, open and close oven door again.

2.Press TIME ENTRY pad.

•Display shows “0000” and “READY”.

3.Press number pads to enter desired cooking time.

•For example, to heat for 2 minutes 30 seconds, press 2, 3, and 0 pads.

4.Press a power level pad if power level less than 100 percent is required.

•Display shows current power level if less than 100 percent power.

•To restore power level to 100 percent, reenter cooking time.

5.Press START pad.

•Oven operates and time counts down.

•Display shows “POWER” only when microwave energy is present.

•If power level less than 100 percent power was programmed, display shows power level. Display counts down cooking time.

6.Oven stops heating and oven signal sounds when heating timing elapses.

Preprogrammed Number Pads

1.Open oven door.

•Display shows “b” or “d” and “READY”.

•Fan and light operate.

•If door is closed or RESET pad is pressed before finishing programming sequence, oven exits programming mode.

2.Press and hold pad 1 for approximately 15 seconds.

•After 15 seconds, signal sounds. Display shows “Pb” or “Pd” indicating “b” or “d” menu.

3.Press MENU pad to select preprogrammed menu if necessary.

4.Press desired number pad.

•Display shows heating time and power level if less than 100 percent power.

5.Press number pads to enter desired cooking time.

•For example, to heat for 2 minutes 30 seconds, press 2, 3, and 0 pads.

6.Press a power level pad if power level less than 100 percent is required.

•Display shows current power level if less than 100 percent power.

•To restore power level to 100 percent, reenter cooking time.

7.Press START pad to save new heating time and power level in oven memory.

•Display shows “Pb” or “Pd” indicating “b” or “d” menu.

•Repeat step 3-8 to program additional pads.

8.Press RESET pad or close oven door to exit programming mode.

9

Page 8 Page 10
Page 9
Image 9
Amana Rfs9mp, rfs11MP owner manual Programming, Reviewing Preprogrammed Pads, Manual Time Entry, Preprogrammed Number Pads
Page 8 Page 10

Rfs9mp, rfs11MP specifications

The Amana RFS11MP and RFS9MP are commercial microwave ovens designed to meet the demands of various food service operations. These two models are engineered with advanced technology to provide high-quality cooking performance and exceptional reliability.

The Amana RFS11MP features a spacious 1.2 cubic foot cavity, accommodating large dishes and enabling efficient cooking for a variety of menu items. With a power output of 1100 watts, this model uses a combination of rapid cooking and innovative microwave technology to deliver consistent and even heating, significantly reducing cooking times while preserving the integrity of the food. The microwave operates with an easy-to-use digital control panel that offers pre-programmed cooking options, ensuring quick and precise operation.

On the other hand, the Amana RFS9MP is slightly more compact, with a 0.9 cubic foot capacity, making it ideal for establishments with limited kitchen space. Despite its smaller size, the RFS9MP also boasts a powerful 1000-watt microwave system that delivers efficient cooking and reheating capabilities. Similar to its counterpart, the RFS9MP features a user-friendly control panel and allows for customizable cooking options, thus enhancing its versatility in preparing diverse cuisines.

Both models incorporate Amana's unique technology, including a stacked heating mode that ensures food is heated from the top and bottom, resulting in better overall cooking quality. The high-speed cooking processes make these microwaves suitable for busy kitchens where time efficiency is critical.

Durability is a significant characteristic of the RFS11MP and RFS9MP models. They are constructed with stainless steel exteriors and interiors, ensuring longevity and easy maintenance. Their robust design complies with commercial kitchen standards, making them a suitable choice for restaurants, hotels, and catering services.

In addition to their impressive performance features, these microwaves prioritize safety as well. They come equipped with a safety interlock system, preventing accidental operation when the door is open. This thoughtful engineering ensures that operators can work confidently in fast-paced kitchen environments.

In conclusion, the Amana RFS11MP and RFS9MP serve as reliable, efficient, and powerful tools in commercial cooking. With their advanced technology, user-friendly controls, and durable construction, they cater to a range of cooking needs while enhancing productivity in busy food service operations.
Top Page Image Contents