To Replace:

1.Line up openings in the burner bowl with the coil element receptacle.

2.Holding the coil element as level as possible, slowly push the coil element terminal into the receptacle.

3.When the terminal is pushed into the receptacle as far as it will go, push down the edge of the coil element opposite the receptacle.

HomeCanning

When canning for long periods, alternate the use of elements between batches. This allows time for the most recently used areas to cool.

Center the canner on the element. Canners should not extend more than ½" (1.3 cm) beyond the element.

Do not place canner on 2 elements at the same time.

For more information, contact your local agricultural department. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-fitting lid, and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.

Cookware with nonstick surfaces should not be used under the broiler.

Use the following chart as a guide for cookware material characteristics.

COOKWARE

CHARACTERISTICS

 

 

Aluminum

Heats quickly and evenly.

 

Suitable for all types of cooking.

 

Medium or heavy thickness is best for

 

 

most cooking tasks.

 

 

Cast iron

Heats slowly and evenly.

 

Good for browning and frying.

 

Maintains heat for slow cooking.

 

 

 

Ceramic or

Follow manufacturer’s instructions.

Ceramic glass

Heats slowly, but unevenly.

 

 

Ideal results on low to medium heat

 

 

settings.

 

 

Copper

Heats very quickly and evenly.

 

 

 

Earthenware

Follow manufacturer’s instructions.

 

Use on low heat settings.

 

 

Porcelain

See stainless steel or cast iron.

enamel-on-

 

 

steel or cast

 

 

iron

 

 

 

 

Stainless steel

Heats quickly, but unevenly.

 

A core or base of aluminum or copper

 

 

on stainless steel provides even

 

 

heating.

OVEN USE

Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well- ventilated room.

OvenTemperatureControl

IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door and element or burner cycling may give incorrect readings.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven.

To Set Oven Temperature:

Push in and turn oven control knob to desired temperature setting.

AluminumFoil

IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire rack with foil because air must be able to move freely.

To catch spills, place foil on rack below dish. Make sure foil is at least ½" (1.3 cm) larger than the dish and that it is turned up at the edges.

6

Page 6
Image 6
Amana W10181328B manual Oven USE, HomeCanning, Cookware, OvenTemperatureControl, AluminumFoil