Amana W10245579A, W10212195A installation instructions Attach Dishwasher to Cabinet

3.Form a U-shaped hook on the bare ground wire.

4.Wrap the ground wire hook clockwise around the green grounding screw and under the washer.

5.Tighten the green grounding screw.

A

A

B

C

A. Bare ground wire

B.Washer

C.Green grounding screw

6.Using UL-listed/CSA-approved twist-on connectors sized to connect direct wire to 16-gauge dishwasher wire, connect the white wire from the power supply to the white wire on the terminal box.

7.Using UL-listed/CSA-approved twist-on connectors sized to connect direct wire to 16-gauge dishwasher wire, connect the black wire from the power supply to the black wire on the terminal box.

8.Tighten the conduit connector screws.

NOTE: Make sure the screwheads are facing to the left when tightening the conduit nut.

9.Insert tabs on the left-hand side of the terminal box cover.

10.Using a ¹⁄₄" nut driver and previously removed screw, reinstall the terminal box cover with the wires inside terminal box.

11.Check that no wires are pinched by the cover.

Attach Dishwasher to Cabinet

WARNING

Tip Over Hazard

Do not use dishwasher until completely installed. Do not push down on open door.

Doing so can result in serious injury or cuts.

1.Check that dishwasher is still level front to back and side to side in the cabinet opening.

15