3.Use a rubber hose connector (not provided) with
NOTE: It is recommended that the drain hose be looped up and securely fastened to the underside of the counter.
A
H
A. Drain
D. Large drain hose clamp (provided)
B
C
D
E
GF
E.Drain hose
F.Rubber hose connector (not provided)
G.Waste tee
H.Drain trap
A
B
C
D
A. Large drain hose clamp (provided) | C. Disposer inlet |
B. Drain hose | D. Drain trap |
3.Insert the drain hose through the hole cut in the cabinet and to the front and center of the opening where the drain connection will be made.
A
4.Insert the drain hose through the hole cut in the cabinet and to the front and center of the opening where the drain connection will be made.
A
A. Drain hose
A. Drain hose
Connect Drain Hose to Waste Disposer—No Air Gap
1.Remove the waste disposer knockout plug. NOTE: Do not cut the end of the drain hose.
2.Attach the drain hose to the waste disposer inlet with the large drain hose clamp (provided).
This connection must be before the drain trap and at least 20" (50.8 cm) above the floor.
Connect Drain Hose—No Waste Disposer or Air Gap
1.Cut the end of the drain hose, if needed. NOTE: Do not cut the ribbed section.
2.Attach the drain hose to the waste tee with the large drain hose clamp (provided).
NOTES:
■If the drain hose was cut, use 1¹⁄₂" to 2" (3.8 to 5 cm)
■This connection must be before the drain trap and at least 20" (50.8 cm) above the floor.
■It is recommended that the drain hose be looped up and securely fastened to the underside of the counter.
A
B C
E
D
A. Drain | D. Drain trap |
B. Large drain hose clamp (provided) | E. Waste tee |
C. Drain hose |
|
8