COOKTOP USE
Cooktop/Oven Temperature Controls
2.Look through the hole in the oven bottom to verify that the pilot inside the cavity is lit.
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death or fire.
Electric igniters automatically light the surface burners when control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate.
To Set Burner Temperature:
1. | Push in and turn knob counterclockwise to LITE. |
| All four surface burners and the oven burner will click. Only |
| the burner with the control knob turned to LITE will produce a |
| flame. |
2. | Turn knob to anywhere between HI and LO. The clicking will |
| stop. Use the following chart as a guide when setting heat |
Pilot light hole
3.Turn the oven control knob to the desired temperature setting.
Battery failure
In case of prolonged battery failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to LITE. After burner lights, turn knob to setting.
Surface Burners
levels. |
SETTING | RECOMMENDED USE | |
|
|
|
LITE | ■ | Light the burner. |
|
|
|
HI | ■ | Start food cooking. |
| ■ Bring liquid to a boil. | |
|
| |
MED (Medium) | ■ Hold a rapid boil. | |
| ■ Quickly brown or sear food. | |
| ■ Fry or sauté foods. | |
A
B
C
D
E
| ■ Cook soups, sauces and gravies. | |
| ■ Stew or steam foods. | |
|
|
|
LO | ■ | Keep food warm. |
| ■ | Simmer. |
|
|
|
To Set Oven Temperature:
1.Push in and turn oven control knob counterclockwise to LITE.
A. Burner cap (underside)
B. Alignment pins
C.Igniter
D.Burner base
E.Gas tube opening
IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps and bases according to the “General Cleaning” section.
8
