Radio on: Turns the wireless radio on. LED of the card will be flickering for
few seconds to establish the connection.
Radio off: Turns off the radio. A pop-up Windows will ask for your
confirmation. If confirmed, the Status Icon will be changed to look like this
Then WL11-SD card will stop functioning.
Status: Shows the current wireless network status like shown in figure 2.
The status screen also shows parameters about the wireless connection.
Wireless Network: Shows the currently available networks in Figure 3.
Note: Wireless Network is only shown on old version of software on ETSI
Domain.
Advanced Options: Show the advanced configuration such as WEP and
power save mode in Figure 6.
About: Shows the driver version and the setup utility software version in
Figure 7
5.2.1 Status Figures 2. Status and Information
AP INFO: Shows the current access point relevant information.
SSID: Shows the current access point name (ESS ID).
Type: Shows the current connection mode.
WEP (Wired Equivalent Privacy): shows the current WEP used in the AP.
WEP can be enabled or disabled.
MAC: Shows the AP’s MAC address that this card is communicating.
CARD INFO: Shows the information about WL11-SD card inserted such as,
IP: IP address of the card,
MAC: MAC address of the card.
Release Button: Releases the Current IP address
Renew Button: Renews the IP address
LINK INFO: Shows the current wireless link information