Click YES to accept the installation. Continue follow the installation
wizard.
Click Finish to complete the driver installation.
5.1 Basic Setup
When WL11-SD card is inserted, it should connect to the available Access
Point (AP) automatically. If more than one AP is available then the Wireless
SD should connect to the AP, which has stronger signal strength. When the
driver is loaded and if it is working normally an Icon is displayed on the
lower right of the PDA screen. Once it is observed, now you are ready to
connect to the Internet. Other icons have different meaning and they are:
Icon indicates the network is not established.
Icon indicates that the card is scanning for the nearest AP.