AmbiCom WL11-SD 4 Installing your WL11-SD Client Driver

Access Point or Router that may be connected to the broadband or dial-up
connection or Wireless Hot Spot and now you are ready to:
 Share files and printers*
 Access the Internet
 Listen to internet radio
 Watching online movie
 Reading and replying email
 And more
* Some application might require installing third party software; see your
PDA operating manual
3.2.3 Enterprise Networking
With the Wi-Fi certified Access Point in the corporate network system, you
can connect to a corporate Local Area Network (LAN) infrastructure to have
wireless access to all network facilities. LAN Infrastructures may either be
 Stand- alone wireless LANs*
 Wireless network infrastructures connected to an existing Ethernet
network.
* Some application might require installing third party software; see your
PDA operating manual
3.3 About the WL11-SD CD-ROM
The WL11-SD CD-ROM contains both software and documentation for the
WL11-SD card. If you wish to install the WL11-SD driver software, turn to
Section 4 "Installing your WL11-SD Client Driver" and follow the instruction.
4 Installing your WL11-SD Client Driver
4.1 Installation of the WL11-SD driver to the Pocket PC
 Connect your PDA to your computer and make sure ActiveSync
has established for a connection between the two devices.
 Insert the WL11-SD Setup CD into your CD-ROM. The following
Installation wizard will pop up to guide you through the process.
Unless you have deactivated the auto-run feature in Windows, the following
screen should appear automatically.
If this screen does not appear automatically, you can access the installation
program by clicking the Start button and selecting Run. In the drop down
box provided, type “D:\ Setup.exe” (“D” represents the CD-ROM drive).