Amcor ALTL -12 Parts, Control Panel, Accessories, Operation, Front, Back, Setting On /Off

Models: ALTL -12

1 8
Download 8 pages 61.92 Kb
Page 4
Image 4
Control Panel

Operation

Control Panel

 

ON

 

OFF

24� :00

00:00

 

COMP

18:00

06:00

 

12:00

Mode Temp. Up Temp. Down SpeedTimer On/Off

Temp. Up

Fan Speed:

Timer

 

On / Off

Mode:

High / Low

 

AC or Fan/Cool/Heat

Temp. Down

 

When the unit is plugged into a working outlet, and the ON button is pushed, the LCD will display the CLOCK.

Setting On /Off

To turn the unit on, press the ON / OFF button.

1.The first time the unit is turned on, it will work in the AUTO MODE.

a.If the room is warmer than 75° F the unit will operate in the COOLING MODE.

b.If the room is warmer than 68° F, but lower than 75° F, the unit will operate in the VENTILATION MODE.

c.If the room is below 68° F, the unit will operate in the HEAT MODE. (This is for models with the HEAT FUNCTION)

2.The unit will re-start at the last setting. At re-start, turn ON time is cancelled.

3.Press the ON / OFF button to stop the unit. The settings will be kept. The pre-set turn OFF time will be cancelled.

Setting The Temperature

If you want to change the set temperature, press TEMP UP or TEMP DOWN.

The three digit display will indicate the set temperature.

The temperature may be set (UP or DOWN) from 62° F to 90° F

Mode Switch

Press the Mode button to select required working mode: auto–>cooling–> fan–> heating–> etc., (Heating is only available for cooling & heating models), the corresponding sign of selected mode displays on the

LCD: O –>

–>

Setting Fan Speed

Press the Speed button to selected the desired Fan speed: High or Low. This function cannot be selected when it is in auto mode. On High speed, the fan turns faster, and on Low speed, the fan turns slower. The selected speed will be active 2 seconds after the button is pressed.

Setting Timer

For all of the following TIMER programming, proceed firstly with these standard steps:

• Press the Timer button briefly; the 2 left digits of the 4 digits on the LCD display are flashing. 88:88

• Press Temp. Up or Temp. Down to adjust the hour,

• Press the Timer button briefly again, the 2 right digits of the 4 digits are flashing.

Press Temp. Up or Temp. Down to adjust the minutes of the clock in intervals of 5 minutes. The timer is set. After 8 seconds the time display returns.

 

 

Parts

 

Front

 

Back

1

 

 

5

 

 

 

2

 

 

 

 

 

3

6

 

 

 

 

 

 

7

 

 

 

8

 

 

 

9

 

 

4

 

1.

Control Panel

5.

Air Filter

2.

Cooling Air Outlet

6.

Air Inlet

3.

Handle

7.

Exhaust Air Outlet

4.

Castors

8.

Cord Hanger

 

 

9.

Water Stopper (Rubber Plug Inside)

Accessories

10. Adaptor - for insertion over the

10

 

hose and into the back of the

12

air conditioner

 

11.Exhaust Hose

12.Adjustable Slide Bar

11

13. Round Connector

14. Cap for Round Connector

13 Setting On /Off

15. Remote Control

14

15

8

5

Page 4
Image 4
Amcor ALTL -12 Parts, Control Panel, Accessories, Operation, Front, Back, Setting On /Off, Setting The Temperature