GB
CLEANING
First of all switch off the unit and pull the plug.
Clean the housing with a soft, damp cloth. Never use aggressive chemicals, petrol, detergents or other cleansing solutions.
Filter
The single layer screen filter cleans the circulated air. The filter needs to be cleaned regularly with a vacuum cleaner to avoid blocking the air flow.
•Push the two clips on the filter housing downward and pull the filter housing forward and out of the unit.
•Remove the rear retainer from the housing by gently prising it from the retaining clips.
•Insert the screen filter aligning the two cut outs with the clips on the top of the filter housing.
•Reverse the procedure to
Notice! Never use the air conditioner without filter.
STORAGE
See the instructions "Emptying the water container" on page 7.
• | Drain the condensed water completely. |
|
• | Clean (or replace) the filter. |
|
• | Put the unit on a sunny day in fan mode for a couple of |
|
| hours to ensure that the inside becomes completely dry. |
|
• | Store the power cable as shown, protect the unit against | Cable storage |
| dust and store in a dry place not accessible for children. | |
|
|
ELECTRIC CONNECTION
Important: how to wire a 13 amp plug
The wires in the mains lead on this appliance areGREEN/YELLOW
coloured in accordance with the following code:
Earth
BROWN
GREEN AND YELLOW – EARTH BLUE – NEUTRAL BROWN – LIVE
As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows:
The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol or coloured green and yellow.
The BLUE wire must be connected to the terminal marked N or coloured black. The BROWN wire must be connected to the terminal marked L or coloured red.
Live
FUSE
13 Amp
8