Connecting the Power Cord

Caution

• Use only the power cord supplied with the monitor.

1.Turn off the main power switch.

2.Plug the power cord (supplied) into the AC input terminal.

3.Plug the power cord (supplied) into the AC power outlet.

3 For power outlet

Main power switch

1

2

Power cord (Supplied) AC input terminal

Binding Cables

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.

Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.

Cable

Cable clamp attachment

Cable clamp

Removing the Handles

The handles can be removed.

Handle

Handle screws

Caution

The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.

To attach handles, be sure to use the handles and handle screws which were removed from the monitor.

Be sure the handles are attached securely.

E14

Page 14
Image 14
Sharp PN-E602 operation manual Connecting the Power Cord, Binding Cables, Removing the Handles