Layout and Storage
Ball Bearing Shelf:
To move a ball bearing shelf, first remove all bottles, loosen the screws on the shelf, slide out the shelf, remove the sliding guides from the walls, then refit them as shown below, and fix the screws.
Guide
Guide
Wall
Wall
Recommendations
Your cabinet was designed to store a maximum number of bottles in total security. We recommend that you observe the tips below to optimize loading.
•Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated in one point. Also make sure your bottles do not touch the back of the cabinet, or the step at bottom. Also make sure that bottles are not all grouped together at the top or bottom of
the cabinet.
•Observe the loading instructions provided in section 6, according to the type of storage fixtures with which your cabinet is equipped, and never stack bottles on a sliding shelf.
•Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Before modifying your Wine Vault's original configuration in any way, be sure to ask your dealer for advice.
12