Installation

When you unpack your Wine Vault, make sure the unit is in perfect conditon by inspecting the unit from all angles.

If the unit is damaged in any way, contact Amcor within 24 hours of receiving the unit. Check your unit to make sure you have all the parts:

Wine Vault Parts List By Model

WV-50

WV-100

WV-150

1- Wine Vault Cabinet

1- Wine Vault Cabinet

1- Wine Vault Cabinet

3- Wooden Shelves

5- Wooden Shelves

8- Wooden Shelves

1- Metal Handle Assembly Bag

1- Metal Handle Assembly Bag

1- Metal Handle Assembly Bag

with 2 Keys

with 2 Keys

with 2 Keys

1- Carbon Filter Assembly Bag

1- Carbon Filter Assembly Bag

1- Carbon Filter Assembly Bag

1- Owners Manual

1- Owners Manual

1- Owners Manual

 

 

 

If you wish to install your cabinet under a worktop, you will need to remove the top plate which is fixed from underneath by two front screws in the hinges and two screws behind in the angle brackets.

Keep the two front screws if you wish to encase the unit under a worktop so as to fix it to the existing worktop (see diagrams page 4).

Move the cabinet to where you want to install it. Make sure the place selected is:

Away from any source of heat

Not too damp (laundry room, utility room, bathroom, etc.)

On a stable level surface

Equipped with a power point (standard socket, rated voltage, 16A, connected to earth)

Make sure the On/Off switch located on the right of the control panel is in the off position.

Take out the power cord and connect it as shown in section 3.

Check the power point supply (fuses in, fuse amperage, circuit breaker working.

You can if you wish use another appliance to check the power supply.)

Adjust the four feet underneath the cabinet (screwing them up or unscrewing them) so that your cabinet is level (it is advisable to use a spirit level).

Slide the cabinet into its final position, leaving a space of between .75" and 2.25" between the wall and the rear wall of the cabinet, for installation under a worktop, fix the cabinet to the worktop using two screws in the top hinges (see page 6).

Do not obstruct the front ventilation grille.

If Wine Vault is installed under countertop or in cabinet, it is recommended that a ventilation hole be cut to allow for proper ventillation of the unit. A flush mount grill may be used in this case to prevent large objects from falling down vent opening. See diagram on page 6.

The Wine Vault should be installed in a place where the ambient temperature is between 72-78°F. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected.

For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65°F may not be reached.

Remove protective shipping materials from inside the Wine Vault.

Remove the protective paper from the charcoal filter that you will find in the accessories pack. From inside the cabinet, position the filter in the round box located in the top back of the cabinet.

Arrange the shelves to suit your convenience (see section 6.)

Wait 48 hours before switching the cabinet on so as to allow the fluids to settle.

If you need to move the Wine Vault, do not tip over 45 degrees, and only tip towards the back of the unit.

Make sure you can access the plug of the unit for servicing or moving when needed.

5

Page 7
Image 7
Amcor WV 50 owner manual Installation, Wine Vault Parts List By Model

WV 50 specifications

Amcor WV 50 is an innovative packaging solution designed to meet the evolving needs of the food and beverage industry. With a commitment to sustainability, efficiency, and product integrity, Amcor has created the WV 50 to facilitate optimal preservation while minimizing environmental impact.

One of the standout features of the Amcor WV 50 is its use of advanced barrier technologies. These state-of-the-art materials effectively protect contents from external factors, such as moisture, oxygen, and light, which can compromise product quality. By employing multilayer structures, the WV 50 offers exceptional shelf life for a variety of products, ensuring that consumers receive items in their freshest condition.

Another key characteristic of the WV 50 is its versatility. This packaging solution is suitable for a wide range of applications, from ready-to-eat meals to beverages and dairy products. Its adaptability allows manufacturers to streamline their production processes, as they can use a single packaging format for multiple products.

In terms of sustainability, the Amcor WV 50 is designed with environmentally friendly practices in mind. It utilizes recyclable materials, contributing towards a circular economy and reducing landfill waste. This focus on sustainability is becoming increasingly vital as consumers worldwide demand greener alternatives and responsible sourcing practices.

The WV 50 also features user-friendly design attributes. Its easy-to-open structure enhances consumer experience while maintaining tamper evidence, ensuring safety and reliability. Additionally, the printing capabilities integrated into the packaging allow for high-quality branding and product information to be displayed clearly, which is essential in promoting consumer engagement.

Amcor supports the WV 50 with comprehensive technical assistance and innovation services, helping clients optimize their packaging design for performance and sustainability. With scalability in production, the Amcor WV 50 can accommodate both small-batch artisanal products and large-scale commercial operations.

In conclusion, Amcor WV 50 stands out as a leading packaging solution due to its advanced barrier technologies, versatility, commitment to sustainability, and user-friendly design. It not only meets consumer expectations for quality but also aligns with the growing demand for environmentally responsible practices in the packaging industry. As manufacturers seek innovative ways to protect their products while adhering to sustainability goals, the Amcor WV 50 provides a reliable and effective answer.