AMD AN9 32X - page 52

- USB Keyboard Support

Select [BIOS] for the legacy operating system (such as DOS) that does not support USB

keyboard.

- USB Mouse Support

Select [BIOS] for the legacy operating system (such as DOS) that does not support USB

mouse.

OnChip Audio Controller

This option enables or disables the audio controller.

OnChip LAN1 Controller

This option enables or disables the LAN1 controller.

OnChip LAN2 Controller

This option enables or disables the LAN2 controller.

Onboard LAN Boot ROM

This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and

access the local area network directly.

Onboard FDD Controller

Two options are available: Enabled and Disabled. The default setting is Enabled. You can

enable or disable the onboard FDD controller.

Onboard SATA Controller

This item enables or disables the Onboard SATA controller.

- Onboard SATA Mode

This item determines the mode for Onboard Serial ATA.

[IDE]: The on-chip Serial ATA served as IDE mode.

[RAID]: The on-chip Serial ATA served as RAID mode.

- SATA Option ROM

This item allows you to use the boot ROM of onboard Serial ATA RAID to boot up system.

Onboard 1394 Controller:

This option enables or disables the IEEE 1394 controller.

3-20 AN9 32X

Contents

Main Introduction AN9 32X BIOS Setup Driver & Utility CD Appendix Motherboard AMD Socket AM2 Users Manual Page Contents Page Introduction 1. Introduction 1.1 Features & Specifications Page Page Page 2. Hardware Setup 2.1 Choosing a Computer Chassis 2.2 Installing Motherboard 2.3 Checking Jumper Settings 2.3.1 CMOS Memory Clearing Header and Backup Battery Page 2.3.2 Wake-up Headers 2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors 2.4.2 Front Panel Switches & Indicators Headers 2.4.3 FAN Power Connectors 2.5 Installing Hardware 2.5.1 CPU Socket AM2 Page 2.5.2 DDR2 Memory Slots 2.5.3 PCI Express X16 Add-on Slots (Install Graphics Card) Page 2.5.4 AudioMAX Connection Slot Page Page 2.6 Connecting Peripheral Devices 2.6.1 Floppy and IDE Disk Drive Connectors 2.6.2 Serial ATA Connectors 2.6.3 Additional USB 2.0 Port Headers 2.6.4 Additional IEEE1394 Port Headers Page Page 2.7 Onboard Status Display 2.7.1 POST Code Displayer 2.7.2 Power Source Indicators 2.8 Connecting I/O Devices 3. BIOS Setup PRESS DEL TO ENTER SETUP 3.1 Guru Utility 3.1.1 OC Guru Page 3.1.2 ABIT EQ Click right-arrow <> key to switch from OC Guru setup menu to ABIT EQ setup menu: ABIT EQ Beep Control This item allows you to enable or disable ABIT EQ Beep Control function. Temperature Monitoring Click <Enter> key to enter its submenu: Voltage Monitoring Fan Speed Monitoring AN9 32X 3-7 FanEQ Control Click <Enter> key to enter its submenu (CPU FanEQ Control): Page Page 3.2 Standard CMOS Features IDE Channel 1 Master/Slave, IDE Channel 3~8 Master: Back to Standard CMOS Features Setup Menu: BIOS Setup 3.3 Advanced BIOS Features Page BIOS Setup 3.4 Advanced Chipset Features Back to Advanced Chipset Features Setup Menu: BIOS Setup AN9 32X 3-17 3.5 Integrated Peripherals OnChip IDE/RAID Function IDE Function Setup: RAID Configuration: Back to Integrated Peripherals Setup Menu: Page BIOS Setup 3.6 Power Management Setup Page Page 3.7 PnP/PCI Configurations Back to PnP/PCI Configurations Setup Menu: Page Driver & Utility CD 4. Driver & Utility CD 4.1 nVidia nForce Chipset Driver Page 4.3 Silicon Image 3132 RAID Driver Page Page Page 4.7 NVRaid Floppy Disk Appendix AN9 32X 5-1 5. Appendix 5.1 POST Code Definitions 5.1.1 AWARD POST Code Definitions 5-2 AN9 32X AN9 32X 5-3 5.1.2 AC2005 POST Code Definitions Appendix 5.2 Troubleshooting (How to Get Technical Support?) 5.2.1 Q & A Page Page 5.2.2 Technical Support Form 5.2.3 UNIVERSAL ABIT Contact Information