-Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature exceeds the shutdown temperature limit, the system will shutdown automatically.
-Shutdown Temp.
This item sets the temperature that will shutdown the system automatically in order to prevent system overheating.
-Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will sound.
-Beep Temp.
This item selects the warning temperature limit.
※The shutdown temperature must be set above the warning temperature.
Voltage Monitoring
Click <Enter> key to enter its submenu:
µGuru Utility V1.00 |
|
|
|
|
| BIOS | ||
ABIT EQ |
|
|
|
|
|
|
| |
Voltage Monitoring |
|
|
|
|
|
| ||
| Reading | Shutdown | Beep | High |
| Low |
| |
|
| Enable | Enable | Limit |
| Limit |
| Setup |
|
|
|
|
| ||||
(*)CPU Core Voltage | 1.40 | V (*) | (*) | 1.60 | V | 0 | V |
|
(*)DDR2 Voltage | 1.80 | V ( ) | (*) | 2.20 | V | 1.50 | V |
|
(*)DDR2 VTT Voltage | 0.90 | V ( ) | (*) | 1.10 | V | 0.75 | V |
|
(*)HyperTransport Voltage | 1.20 | V ( ) | (*) | 1.45 | V | 0.95 | V |
|
(*)NB Voltage | 1.20 | V ( ) | (*) | 1.45 | V | 0.95 | V |
|
(*)CPU VDDA 2.5V Voltage | 2.50 | V ( ) | (*) | 3.00 | V | 2.00 | V |
|
(*)SB Voltage | 1.50 | V ( ) | (*) | 1.00 | V | 1.20 | V |
|
(*)ATX +12V | 12.00 | V ( ) | (*) | 14.40 | V | 9.60 | V |
|
(*)ATX +12V | 12.00 | V ( ) | (*) | 14.40 | V | 9.60 | V |
|
(*)ATX +5V | 5.00 | V ( ) | (*) | 6.00 | V | 4.00 | V |
|
(*)ATX +3.3V | 3.30 | V ( ) | (*) | 3.95 | V | 2.65 | V |
|
(*)ATX 5VSB | 5.00 | V ( ) | (*) | 6.00 | V | 4.00 | V |
|
|
|
|
| |||||
↓↑→←:Move Enter:Select | F10:Save ESC:Exit |
|
| |||||
All Voltages
These items display the voltage of each element.
-Shutdown Enable
Use <Space> key to enable system shutdown function. If the voltage of corresponding element is higher/lower than the high/low limit, the system will automatically shutdown.
AN9 32X |
