Drivers included:
Windows
Chipset INF Install Utility version 7.0.0.1019
Optional Intel 6300ESB ICH chipset driver updates
Linux Driver Packages
RedHat* Enterprise Linux 3.0 Server driver updates
Note: Software in the kit is provided free by the vendor and is only licensed for evaluation purposes.
Refer to the documentation in your Development Kit for further details on any terms and conditions that may be applicable to the granted licenses. Customers using tools that work with other third party products must have licensed those products. Any targets created by those tools should also have appropriate licenses. Software included in the kit is subject to change.
Refer to http://developer.intel.com/design/intarch/devkits for details on additional software from other third party vendors.
2.4.1AMIBIOS* for the Development Kit
The evaluation board is
2.5Before You Begin
| Table 2 presents the additional hardware you may need for your Development Kit. | |
Warning: | Do not install the power supply until all other installation steps have been completed. | |
Table 2. | Additional Hardware | |
|
|
|
| VGA Card and Monitor | You can use any standard VGA or greater resolution monitor using a VGA card. |
|
|
|
| Keyboard | You can use a keyboard with a PS/2 style connector or adapter as well as USB. |
|
|
|
| Mouse | You can use a mouse with a PS/2 style connector or adapter as well as USB. |
|
|
|
| Hard Drives | You can connect up to two IDE and two SATA devices to the evaluation board. |
|
|
|
| Floppy Drive | You can connect a floppy drive to the connector on the evaluation board. No floppy |
| (optional) | drives or cables are included in the Development Kit. |
|
|
|
|
| The evaluation board behaves much like a standard PC motherboard. Many PC- |
| Other Devices and | compatible peripherals can be attached and configured to work with the evaluation |
| board. For example, you may want to install a sound card or additional network | |
| Adapters | |
| adapters. You are responsible for procuring and installing any drivers required for | |
|
| |
|
| additional devices. |
|
|
|
2.6Setting up the Evaluation Board
Once you have gathered the hardware described in Section 2.5, follow the steps below to set up your Development Kit. This manual assumes you are familiar with basic concepts involved with installing and configuring hardware for a PC or server system.
| |
April 2007 | User’s Manual |
Order Number: | 13 |