English
Standard CMOS Features |
|
|
| ||||
|
|
|
| ||||
|
| CMOS Setup |
| ||||
|
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) |
| Thu, Dec 30 2004 | Item Help | |||
| Time (hh:mm:ss) |
|
| 22:31:24 |
| Menu Level` | |
` IDE Channel 0 Master |
| [None] |
| Change the day, month, | |||
` IDE Channel 0 Slave |
| [None] |
| year |
| ||
` IDE Channel 1 Master |
| [None] |
| <Week> |
| ||
` IDE Channel 1 Slave |
| [None] |
|
| |||
` IDE Channel 2 Master |
| [None] |
| Sun. to Sat. | |||
` IDE Channel 3 Master |
| [None] |
| <Month> | |||
|
|
|
|
|
| ||
| Drive A |
|
| [1.44M, 3.5"] | Jan. to Dec. | ||
| Floppy 3 Mode Suport |
| [Disabled] |
| <Day> |
| |
|
|
|
|
|
|
| |
| Halt On |
|
| [All, But Keyboard] | 1 to 31 (or maximum | ||
|
|
|
|
|
| allowed in the month) | |
|
|
|
|
|
| <Year> |
|
|
|
|
|
|
| 1999 to 2098 | |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | |||
|
| F5: Previous Values |
| F7: Optimized Defaults |
| ||
|
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
|
| |||
| Week | The week, from Sun to Sat, determined by the BIOS and is display only | |||||
| Month | The month, Jan. Through Dec. |
|
|
| ||
| Day | The day, from 1 to 31 (or the maximum allowed in the month) |
| ||||
| Year | The year, from 1999 through 2098 |
|
|
| ||
| Time |
|
|
|
|
|
|
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave
IDE HDD
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave
IDE devices setup. You can use one of three methods:
• Auto | Allows BIOS to automatically detect IDE devices during POST. (Default value) |
• None | Select this if noIDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
• Manual | User can manuallyinput the correct settings. |
Access Mode | Use this to set the access mode for the hard drive. The four options are: |
| CHS/LBA/Large/Auto(default:Auto) |
IDE Channel 2/3 Master
IDE HDD
Extended IDE Drive
SATA IDE devices setup. You can use one of two methods:
• Auto | Allows BIOS to automatically detect SATA IDE devices during POST(default) |
• None | Select this ifno SATA IDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
- 32 - |
