American Audio CDI-100 9. CREATING AND PLAYING A LOOP , LCD LOOP INDICA TORS, EXITING A LOOP

BASIC OPERATIONS (CONT.)
©American Audio® - www.AmericanAudio.us - CDI-100 Mp3 Instruction Manual Page 17
9. CREATING AND PLAYING A LOOP
A loop is a sound loop that plays continuously without sound interruption. You can use this loop to create dra-
matic effect in your mixing. This loop has no time limit and you could actually loop the entire length of disc.
2) Press the IN BUTTON (10). This will set the starting point of the
LOOP. The IN BUTTON (10) LED will light.
1) Press PLAY/PAUSE BUTTON (11) to activate playback
mode
Figure 15
Figure 14
3) Press the OUT BUTTON (10) to set the ending point for your LOOP
(Figure 16). The IN BUTTON (10) and OUT BUTTON (10) LEDs will
immediately begin to flash rapidly, indicating the LOOP mode has
been activated.
LCD LOOP INDICATORS - During a loop, the LOOP INDICATOR (29)
will turn on in the LCD DISPLAY (16) indicating a loop is active.
EXITING A LOOP - To exit a LOOP, press the OUT BUTTON (10).
The IN BUTTON (10) and OUT BUTTON (10) LEDs will remain flash-
ing. Music playback will resume normal play. The IN BUTTON (10)
and OUT BUTTON (10) LEDs will flash to remind you that a loop is
in memory.
Figure 17
Figure 16