BASIC OPERATIONS (CONT.)
©American Audio® - www.AmericanAudio.us - CDI-100 Mp3 Instruction Manual Page 18
REPLAY LOOP - The RELOOP (7) function allows you to return to your stored
loop at any time. The IN BUTTON (10) and OUT BUTTON (10) LEDs will indicate
a loop is stored in memory, and may be played at any time. To replay the loop,
press the RELOOP BUTTON (7). The IN BUTTON (10) and OUT BUTTON (10)
LEDs will again begin to flash indicating LOOP mode has been activated and
your loop will immediately begin to play.
Figure 18
10. CHANGING THE TIME DISPLAY (31)/TIME BAR (32):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (2), will change the
time display information (31) in the LCD (1). The following is a break down of the
time settings and their definitions:
1) REMAIN (28) - This details the time in the LCD (1) as the current tracks’
remaining running time.
2) ELAPSED (25) - This details the time in the LCD (1) as the current tracks’
elapsed running time.
3) TOTAL REMAIN (26) - This describes the time in the LCD (1) as the disc total
remaining running time.
TIME BAR INDICATOR - Details the time defined in the TIME METER (31) as a visual bar icon. As with the
TIME METER (31) this bar is also dependent on the selected time function [REMAIN (28), TOTAL REMAIN (26),
OR ELAPSED (25)]. This bar will begin to flash when a track is ending regardless of which time function you
are in. Use the flashing bar as a visual reminder that a track is ending.
Figure 19