American Audio CDS-1 BASIC OPERATIONS

BASIC OPERATIONS

©American Audio® - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 13

5. STOPPING PLAYBACK

Stopping playback will stop the drive mechanism allowing you to safely

remove the CD from the transport drive. Pressing the STOP BUTTON (1)

during any function will immediately stop the unit.

6. PAUSING

Pausing temporarily stops playback but does not stop the drive mecha-

nism. Pressing the PLAY/PAUSE BUTTON (8) changes the operating mode

between play and pause. The PAUSE INDICATOR (7 & 34) will glow when

pause mode is activated or when a track is in cue mode.

This feature allows you to search through a track to set a cue or the begin-

ning of a loop point. To use the search function you must first be in Pause

or Cue mode. Once you are in Pause or Cue mode, use your finger to tap

on either the FORWARD SEARCH/SCAN BUTTON (13) or the REVERSE

SEARCH/SCAN BUTTON (12) depending on which direction you want to

search (figure 9). Holding down on the button will increase the speed the

search function will scan. Once you reach your desired starting point you

can set a cue (starting) point by pressing the PLAY/PAUSE BUTTON (19)

as in figure 9. Pressing the CUE BUTTON (6) will return the disc to the cue

point just set.

Figure 9

Figure 7

Figure 8