©American Audio® - www.AmericanAudio.us - CK 800Mp3 Instruction Manual Page 25
RELAY (FLIP-FLOP™)
This feature is a kind of “auto pilot”. When you are using the CK 800Mp3 system, you can have one player
begin playback when the other ends. You can “Flip-Flop™” single tracks, the entire disc, or a combination of
the two.
To FLIP-FLOP™ single tracks:
1) Set the mixer's crossfader to the center position, and press the relay Button (23). Also, set both
2) Set the two players to playback in single mode, SIngle (47) should be indicated in the lcd (16).
3) Load your two players with audio discs.
4) After they have both cued, press the play/pauSe Button (11) on one player to begin playback.
5) After the first player’s single track has ended the second player’s track will immediately begin playback.
6) FLIP-FLOP™ will continue until you stop it or power is interrupted.
To Flip-Flop entire CDs:
Be sure your players are both in continuous play mode, make sure SIngle mode (47) does not appear in the
lcdS (16) of both players. Follow all directions for single track FLIP-FLOP™ above. When one player’s disc
ends the other player will immediately begin playback.
Note: You may combine FLIP-FLOP™ single and continuously playback modes by selecting either single or
continuous playback on your units.
RELAY (FLIP-FLOP™)