GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT CONT.
speed (Beats per minute - BPM) when the PITCH (13) function is activated. This functions allows the beats between two CD’s or any other music source to match. This is a momentary function. When the button is depressed the pitch speed will automatically return to PITCH SLIDER'S (3) selected pitch. Holding down this button will give a maximum of
(+)PITCH BEND - The (+) pitch bend function creates a momentary “BUMP” in the CD’s pitch speed (Beats per minute - BPM) when the PITCH (13) function is activated. This functions allows the beats between two CD’s or any other music source to match. This is a momentary function. When the button is depressed the pitch speed will automatically return to PITCH SLIDER'S (3) selected pitch. Holding down this button will give a maximum of +16% pitch. Be sure to remember that this func- tion is a momentary pitch adjustment, for a more precise adjustment use the PITCH SLIDER'S (3) to match the BPM’s with another playing music source.
15.SEARCH BUTTONS -
This search button allows you to quickly scan backwards through a track.
This search button allows you to quickly scan forwards through a track.
16.RELOOP BUTTON - If a LOOP has been made (see setting a LOOP on page 17), but the CD Player is not actively in LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly reactivate the LOOP mode. To exit the loop, press the LOOP OUT BUTTON (11).
17.PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play. While in play mode the green play LED will glow, and while in pause mode the green play LED will flash.
18.CUE - Pressing the CUE button during playback immediately pauses playback and returns the track to the last set cue point. The red CUE BUTTON LED will glow when the unit is in cue mode The LED will also flash every time a new CUE POINT is set. The CUE button can also be held down to momentarily play the CD. When you release the CUE button it instantly returns to the last set CUE POINT.
19.OPEN/CLOSE (Disc Tray Open/Close) - This button is used to open and close the disc trans- port tray door. NOTE: When a disc is loaded, the tray will not open unless the unit is in pause or cue mode.
REMOTE CONTROL - REAR (FIGURE 4)
20.REMOTE JACK - Connect the supplied 8 pin din cable from this jack to the player's remote con- nector. This will allow you to control the player functions.
21.CHANNEL 1 CONTROLLER JACK - Connect the supplied
22.CHANNEL 2 CONTROLLER JACK - Connect the supplied
©American Audio® - www.americanaudio.us -
