©American Audio® - www.americanaudio.us - DP-2™ Instruction Manual Page 8
gENErAL FUNCTIONS AND CONTrOLS A. PLAYER - FRONT (FIgURE 1)1. POWER BUTTON - Press and hold this button for at least 2 seconds to power the unit on and
off.
2. PITCH LOCK - This function allows you to make adjustments to a tracks speed using the pitch
control without altering its tonal pitch. When active the button LED will glow red.
3. SYNC BUTTON - Use this button to set this deck to master and auto sync and the other deck's
tempo to master.
4. PITCH ON/OFF BUTTON - This button activates and deactivates the pitch Slider (21).
5. DECK SELECTION BUTTONS - Use these buttons to select which side of player you want to
control.
6. MICROPHONE VOLUME CONTROL - This knob controls the output volume of the microphone
(34).
7. TRACK SEARCH KNOB - Turning this knob will let you search through tracks. Turn the knob to
scroll backward and forward through tracks.
8. MASTER VOLUME CONTROL - This knob is used to control the master output level. To avoid
distorted output try to maintain an average output signal level no greater than +4dB. To avoid speaker
damage that may be caused by excessive volume, be sure this knob is always set to zero (completely
down) before turning the unit on.
9. CHANNEL FADER - These faders are used to control the output signal of any source assigned to
Figure 1
Figure 2
1
14
13
128
7
6
432
33
32
31
29
16
15
20
17
18
26 25 24 23
21
19
30
28 27
22
9 11
10
5
3441 40 39 37 36 3538