American Audio DV2 USB Top Panel

DV2 USB Controls and Features

1. MaSter VOLUMe COntrOL - This rotary knob is used to control the master output level (volume).

To avoid distorted output try to maintain an average output signal level +4 dB. Be sure this volume

control is always set to zero before turning the unit on.

2. CUe MIXInG COntrOL - This knob selects the channel for monitoring. The monitor signal comes

from the Prefader. This means it will not be affected by the channel faders. You can monitor each chan-

nel individually. Connect your headphones to the HEADPHONES jAck (36). Turn the CUE MIXING

CONTROL to CUE and select the desired channels with the PFL switches. When you turn the CUE

MIXING CONTROL to PGM (PFL switches without function), you can cue the output signal of the mixer.

If the CUE MIXING CONTROL is set to the center position, you can cue both the channel signal you

selected and the output signal.With the CUE LEVEL control, you can adjust the phones volume without

changing the output signal.

3. CUe Le VeL VOLUMe COntrOL - This knob is used to adjusts the headphone volume output

level. Turn the knob in a clockwise direction to increase the headphone volume.

4. MIDI BUttOn - This button activates the MIDI function.

5. LeVeL InDICatOr MODe SeLeCtOr - This button is used to change the operating mode of the

LEVEL INDIcATORS (15). When the switch is in the Master L/R position, the meter will indicate the

master output levels. When the switch is in the PFL CH1/CH2 position the meter will use the left side

of the meter to indicate channel one’s prefader level and use the right side of the meter to indicate

channel two’s prefader level.

Top Panel

17161514