American Audio MCD-110 9. FRAME SEARCH , 10. FRAME SEARCH (FORWARD / REVERSE), 7. AUTO CUE, 8. SETTING CUE POINTS

SINGLE

TOTAL

REMAIN

TRACK M S F

PIT CHTIM E

S G L

C TN

SINGLE

TOTAL

REMAIN

TRACK M S F

PI T C HTIM E

S G L

C TN

SINGLE

TOTAL

REMAIN

TRACK M S F

PI T C HTIM E

S G L

C TN

9. FRAME SEARCH

This feature allows you to scroll through a track to

set a cue, or loop point. To use the scroll function

you must first be in Pause Mode or Cue Mode.

Once you are in Pause or Cue mode, use your fin-

ger tip or hand to turn the JOG WHEEL (2) to scroll

through the track (figure 9). Turning the wheel in a

clockwise direction will advance the frame search

and turning the wheel in a counter-clockwise

direction rewinds the frame search. When you use

the JOG WHEEL (2) the monitor (headphone level)

of a mixer allows you to here what you are scroll-

ing through. Once you reach your desired starting

point you can set a cue (starting) point by press-

ing the PLAY/PAUSE BUTTON (16) as in figure 9.

Pressing the CUE BUTTON (17) will return the disc

to the cue point just set.

10. FRAME SEARCH (FORWARD / REVERSE)

This function lets you a frame search through a track.

To do this press either the forward or reverse SEARCH

BUTTONS (12).

Figure 9

Figure 10

BASIC OPERATION

7. AUTO CUE

”Cueing” is the action of preparing for playback. The unit is designed to automatically cue at the first audible

signal on the first of a disc when a disc is inserted. If a track is selected before a disc is inserted, the unit will

automatically cue to the first audible signal for the selected track.

8. SETTING CUE POINTS

A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (16) is pressed. A cue point

may be created anywhere on a disc or in a track.

Use the JOG WHEEL (2) to set a cue point by

frame. While the disc is in pause or cue mode,

use the JOG WHEEL (2) to scroll through a track

to find your desired starting point. Once you

have found your desired cue point press the

PLAY BUTTON (16) to enter this point in to the

unit's memory. At this point when ever the CUE

BUTTON (17) is pressed it will return the track

to this exact point.

Figure 8