American Audio MCD-110 13. PITCH BEND, PITCH BEND BUTTONS (10), JOG WHEEL (2)

SINGLE

TOTAL

REMAIN

TRACK M S F

PI T C HTIM E

S G L

C TN

SINGLE

TOTAL

REMAIN

TRACK M S F

PI T C HTIM E

S G L

C TN

SINGLE

TOTAL

REMAIN

TRACK M S F

PI T C HTIM E

S G L

C TN

13. PITCH BEND

This function will momentarily increase or decrease a tracks playback speed using the (-) & (+) PITCH BUT-

TONS (10). The maximum pitch bend percentage allowed is +/-16%. The pitch bend function will work in

conjunction with the PITCH SLIDER (8) pitch setting. For example, if the PITCH SLIDER (8) is set to a 2% pitch

gain the pitch bending process will begin at 0% and will continue to the maximum of -/+16%.

PITCH BEND BUTTONS (10)

The (+) PITCH BEND BUTTON (10) will provide a speed bump and the (-) PITCH BEND BUTTON (10) will pro-

vide a slow down. The extent to which the speed changes is proportionate to the amount of time the button

is pressed. For example, if the (+) PITCH BEND BUTTON (10) is held down continuously, the disc speed will

increases and will continue to increase until it reaches a maximum of 16% speed gain. When you release the

(+) PITCH BEND BUTTON (10) the disc speed will automatically return to it’s previous speed.

Holding down or tapping on the (+) PITCH

BEND BUTTON (10) will provide a speed

bump in the playback pitch.

Holding down or tapping on the (-) PITCH BEND

BUTTON (10) will provide a slow down in the

playback pitch.

Figure 14

Figure 15

JOG WHEEL (2)

The JOG WHEEL (2) will temporarily bend the

pitch if a track is in play mode. Turning the

wheel in a clockwise direction will increase

your track pitch and turning the wheel in

a counter-clockwise direction will slow your

track pitch. The speed you rotate the JOG

WHEEL (2) will determine pitch bend percent-

age, to a maximum of +/-16%.

Figure 16

BASIC OPERATION