American Audio Media Operator 5. STOPPING PLAYBACk - Figures 9 & 10, 3. STARTING PLAYBACk - Figure 9, 4. PAUSING

5. STOPPING PLAYBACk - Figures 9 & 10

Stopping playback will not stop the read-

ing mechanism, but merely pause or cue the

track, this function allows the unit to begin play

instantly. There are two ways to stop (pause)

playback:

1) Press the plAy/pAUSE BUTTon (14) dur-

ing playback. This will pause playback at

the exact same point the plAy/pAUSE

BUT Ton (14) was pressed.

2) Press the cUE BUTTon (15) during play-

back. This will pause playback and return

the track to the last set cue point.

3. STARTING PLAYBACk - Figure 9

Insert an SD card or connect an USB drive as

described on page 13 (loADing/EjEcTing An

SD cARD oR USB). Pressing the plAy/pAUSE

BUTTon (14) with an SD Card loaded or USB

drive connected will immediately start playback.

The plAy (42) indicator will glow as soon as

playback begins. The point at which playback

starts (cue point) will automatically be stored in

the memory as the cue point. The unit will return

to this cue point (the point at which playback

started) when the cUE BUTTon (15) is pressed

and released.

BaSiC OPEraTiONS (CONT.)

Figure 9

Figure 10

4. PAUSING - Figure 9

This function pauses playback at the exact same point the plAy/pAUSE BUTTon (14) was pressed. Pressing

the plAy/pAUSE BUTTon (14) will switch between play and pause modes. When the unit is in pause mode

the pAUSE inDicAToR (42) in the lcD DiSplAy (4) and the plAy/pAUSE BUTTon L.E.D. will begin to flash

repeatedly.

6. AUTO CUE

This function will automatically set a cue point to the first audio source. The first set cue point will always be

the beginning of track 1. If a new track is selected before the plAy/pAUSE BUTTon (14) is pressed, a new

CUE POINT will be set to reflect the new starting point. To toggle AUTO CUE on and off hold the Sgl/cTn

BUTTon (16) for 2 seconds.