BaSiC OPEraTiONS (CONT.)
©American Audio® - www.americanaudio.us - Media Operator™ Instruction Manual Page 17
10. EXITING A LOOP - To exit a SEAMLESS
LOOP, press the oUT BUTTon (8). The
in BUTTon and oUT BUTTon LEDs will
remain on, but will stop flashing. Music
playback will resume normal play. The but-
ton LEDs will remain on to remind you that
a loop is stored in memory.
Figure 17
11. REPLAY LOOP - The REloop (8) function
allows you to return to your stored loop at any
time. The in BUTTon and oUT BUTTon LEDs
will indicate a loop is stored in memory, and may
be played at any time. To replay the loop, press
the REloop BUTTon (8). The in BUTTon (8)
and oUT BUTTon LEDs will again begin to
flash indicating SEAMLESS LOOP mode has
been activated and your stored loop will imme-
diately begin to play.
Stutter Effect: You can use your loop to create
a stutter effect. When a loop is playing press
the REloop BUTTon (8) repeatedly to create
this effect.
Figure 18
Figure 19
TIME BAR INDICATOR - Details the time defined in the TimE mETER (36) as a visual bar icon. As with the
TimE mETER (36) this bar is also dependent on the selected time function ElApSED, or REmAin. This bar will
begin to flash when a track is ending regardless, of which time function you are in. Use the flashing bar as a
visual reminder that a track is ending.
12. CHANGING THE TIME DISPLAY (36)\TIME BAR (29):
DURING NORMAL PLAYBACK, pressing the TimE BUTTon (17), will change the time display information (36
& 29) in the lcD (4). The following is a break down of the time settings and their definitions:
1) ELAPSED - This describes the time in the LCD as the current TRACKS Elapsed running time.
2) REMAIN - This describes the time in the LCD as the current TRACKS remaining running time.