American Audio Q-2422/SX CHANNEL 1, CHANNEL 2, 33. REC OUT, "A" PLAYER CONTROL, 35. CHANNEL 2 JACKS, RCA UNBALANCED JACKS, 31. RCA MASTER OUTPUTS, 32. ZONE LEVEL OUTPUTS

REAR PANEL - CONTROLS AND FUNCTIONS

the right, and you move it at least 20% to the left position, any player connected to the "A" PLAYER CONTROL will begin to play. You can create great effects similar to scratching with this feature.

31. RCA MASTER OUTPUTS -

The Master Output includes a pair XLR BALANCED JACKS (28) as well as a pair RCA UNBALANCED JACKS. The RCA jacks send a low current unbalanced output signal. These jacks should only be used for shorter cable runs to signal processors or looping to another mixer. For cable runs greater than 15 feet use the XLR BALANCED JACKS (28).

32. ZONE LEVEL OUTPUTS -

The RCA jacks send a low current, unbalanced output signal. These jacks should only be used for shorter cable runs to signal processors or looping to another mixer.

33. REC OUT -

This is a low current unbalanced output source designed for various tape and CD recorders. The Record Out (REC OUT) level is dictated by the CHANNEL FADER LEVEL (6), it is not influenced by the MASTER VOLUME CONTROL (13).

34. CHANNEL 3 - LINE 3/ LINE 4 RCA INPUT JACKS -

Connect CD players or Tape Decks to these line level inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input.

35. CHANNEL 2 JACKS -

PHONO 2/AUX2 INPUT JACKS - The type of input must directly reflect the selected mode of the CHANNEL 2 - LINE LEVEL SELECTOR SWITCH (36). Connect turntables equipped with

MMpickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level instruments may be connected to these jacks as long as the CHANNEL 2 - LINE LEVEL SELECTOR SWITCH (36) is in the "AUX 2" position. The red colored RCA jack represents the right channel input and the white represents the left channel input.

LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to these line level inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input.

36. LINE LEVEL SELECTOR SWITCH -

CHANNEL 1 - This switch is used to change the mode of CHANNEL 1 - PHONO 1/AUX1 INPUT JACKS. When connecting turntable to these jacks be sure the switch is in the PHONO position, and when using line level input devices select AUX. Always be sure main power is shut off before change the position of the Line Level Selector Switch.

CHANNEL 2 - This switch is used to change the mode of CHANNEL 2 - PHONO 2/AUX2 INPUT JACKS. When connecting turntable to these jacks be sure the switch is in the PHONO position, and when using line level input devices select AUX. Always be sure main power is